In Stock
Ex Tax: $8,644.35

Generac QT13068ANAC 130kW 3,600-Rpm Commercial Series Aluminum Enclosed Generator

  • SCAQMD Compliant
  • Innovative design and prototype testing are key components of generac's success in "improving power by design." but it doesn't stop there. Total commitment to component testing, reliability testing, environmental testing, destruction and life testing, plus testing to applicable CSA, NEMA, EGSA, and other standards, allows you to choose generac power systems with t
  • Solid-state, frequency compensated voltage regulation. This state-of-the-art power maximizing regulation system is standard on all generac models. It provides optimized fast response to changing load conditions and maximum motor starting capability by electronically torque-matching the surge loads to the engine. Digital voltage regulation at +-1%.
  • Single source service response from generac's extensive dealer network provides parts and service know-how for the entire unit, from the engine to the smallest electronic component.
  • Generac transfer switches. Long life and reliability are synonymous with generac power systems. One reason for this confidence is that the generac product line includes its own transfer systems and controls for total system compatibility.
What's in The Box
  • QT13068C Commercial 130kW Generator
  • Two Line LCD Tri-Lingual Digital Nexus Controller
  • Isochronous Electronic Governor
  • Sound Attenuated Enclosure
  • Closed Coolant Recovery System
  • Smart Battery Charger
  • UV/Ozone Resistant Hoses
  • Owner's Manual
  • 2-Year Limited Factory Warranty
  • 30 Day Satisfaction Guaranteed
Power Output 130kW
Type Synchronous
Rotor Insulation Class H
Stator Insulation Class H
Telephone Interference Factor (TIF) <50
Alternator Output Leads 1-Phase 4 wire
Alternator Output Leads 3-Phase 12 wire
Bearings Sealed Ball
Coupling Gear Drive
Excitation System Brushless
Voltage Regulation
Type Electronic
Sensing Single Phase
Regulation +/- 1%
Governor Specifications
Type Electronic
Frequency Regulation Isochronous
Steady State Regulation +/- 0.25%
Electrical System
Battery Charge Alternator 12 Volt 30 Amp
Static Battery Charger 2 Amp
Recommended Battery Group 27F, 700 CCA
System Voltage 12 Volts
Engine Specifications
Model V-Type
Cylinders 10
Displacement (Liters) 6.8
Bore (in/mm) 3.55/90.2
Stroke (in/mm) 4.17/105.9
Compression Ratio 9:1
Intake Air System Naturally Aspirated
Lifter Type Hydraulic
Engine Lubrication System
Oil Pump Type Gear
Oil Filter Type Full flow spin-on cartridge
Crankcase Capacity (qt/l) 5/4.7
Engine Cooling System
Type Closed
Water Pump Belt driven
Fan Speed (rpm) 1950
Fan Diameter (in/mm) 26/660.4
Fan Mode Puller
Fuel System
Fuel Type Natural gas, propane vapor
Carburetor Down Draft
Secondary Fuel Regulator Standard
Fuel Shut Off Solenoid Standard
Operating Fuel Pressure 11-14" water column/21-26 mm HG

Write a review

Note: HTML is not translated!
Bad           Good